Electro-Voice ND96-RC3 Wireless Dynamic Microphone - Black
- Thread-on microphone head for Electro-Voice and other brand's wireless handheld transmitters
- Excellent acoustic control on very loud stages: exceptionally high gain before feedback
- Large diaphragm dynamic capsule creates a rich and detailed frequency response
- Vocal presence emphasis switch selects between alternate sonic signatures
- Shock-mounted capsule minimizes handling noise
The Electro-Voice ND96-RC3 is a robust, highperformance, dynamic supercardioid thread-on vocal microphone head for wireless handheld transmitters. This microphone head electrically and mechanically adapts to Electro-Voice (and many other brands) wireless handheld transmitters that use the common 3-contact rings, 1.25" diameter by 28-thread pitch coupling convention. The floating captured ID collar will spin freely until screwing the head on tightly. It will remain locked in place when fully tightened. This allows the desired orientation of the branding to the transmitter.
Designed for excellent acoustic control on very loud stages, the ND96-RC3 special structural and acoustical designs create performance characteristics allowing the microphone's gain before feedback in a mix to be significantly louder than most microphones. The microphone head's dynamic capsule contains a large Mylar diaphragm, which delivers a rich and detailed frequency response by combining its large surface area for tonal balance with its low-mass highvelocity material for exceptionally fast transient response.
The microphone head features a selectable vocal presence tuning that can be engaged to reduce certain low-mid frequency areas and emphasize key uppermidrange vocal presence areas to increase intelligibility in high-energy reinforcement (see charts). The microphone head features an innovative capsule shock-mount system consisting of a 4-point suspension around the circumference of the capsule combined with a tuned pneumatic pump at the capsule base, offering superior handling noise reduction to eliminate mechanical vibrations and noise in the mix.
The Memraflex grille is made of a durable tight-mesh grille wire that withstands extraordinarily rough treatment. Your microphone head remains protected and looking good gig-after-gig, year-after-year. For additional protection, the capsule contains a hydrophobic cloth membrane, which prevents moisture and debris from reaching the diaphragm. The capsule uses a humbucking coil that attenuates AC hum and electromagnetic interference. Use the ND dynamic mics with confidence near speaker cabinets and EMF generating equipment racks.
- Connects Wirelessly! In situations where running a cable would be impractical or prohibited, use the wireless connectivity and enjoy a hassle-free usage
- Capable of throwing low subs and soaring vocals with 30 Hz - 15 kHz frequency
- Super-cardioid pattern captures sound from the front and avoid unwanted signals from other sides to ensure noise-free recording
- Shock mount - Firmly holds the mic and ensures a clear sound without any distorted noise
Product Type: Microphone
Product Color: Black
Product Material: Steel
Brand Name: Electro-Voice
Length: 3.3"
Manufacturer: The Bosch Group
Product Model: ND96-RC3
Product Name: ND96-RC3 Wireless Head with ND96 Capsule
Application/Usage: Stage
Manufacturer Part Number: ND96-RC3
Manufacturer Website Address: http://www.bosch.com
Packaged Quantity: 1
Package Contents:
- ND96-RC3 Wireless Head with ND96 Capsule
- 1 x Engineering Datasheet
- 1 x Warranty and Product Documentation Information Card
Weight (Approximate): 6.80 oz
