Juniper Networks SRX110 Services Gateway - Security appliance - 8 ports - 100Mb LAN, RS-232, X.21, V.35, RS-449 - VDSL, VDSL2 - 1U - refurbished - rack-mountable
- 802.1q VLAN support
- Point-to-Point Protocol over Ethernet (PPPoE)
- Marking, policing, and shaping
- Class-based queuing with prioritization
- Weighted random early detection (WRED)
- Queuing based on VLAN, data-link connection identifier (DLCI), interface, bundles, or multi-field (MF) filters
- Guaranteed bandwidth
- Maximum bandwidth
- Ingress traffic policing
- Priority-bandwidth utilization
- Firewall, zones, screens, policies
- Stateful firewall, stateless filters
- Network attack detection
- Protocol anomaly detection
- Stateful protocol signatures
- Intrusion prevention system (IPS) attack pattern obfuscation
- Customer signatures creation
Juniper Networks SRX series Services Gateway for the branch is a secure router that provides essential capabilities that connect, secure, and manage workforce locations sized from handfuls to hundreds of users. By consolidating fast, highly available switching, routing, security, and applications capabilities in a single device, enterprises can economically deliver more services, safe connectivity, and a satisfying end user experience. The SRX series Services Gateway provides unmatched consistency, better performance with services, and superior infrastructure protection at a lower total cost of ownership.
SRX series for the branch provides perimeter security, content security, access control, and network-wide threat visibility and control. Using zones and policies, network administrators can configure and deploy branch SRX series gateway quickly and securely. The SRX series also includes wizards for firewall, IPsec VPN, NAT, and initial setup to simplify configurations out of the box.
-
Secure routing
Should you use a router and a firewall to secure your network? By building the branch SRX series with powerful routing, switching and firewall capabilities in one product, enterprises don't have to make that choice. Why forward traffic if it's not legitimate? SRX series for the branch checks the traffic to see if it is legitimate and permitted, and only forwards it on when it is. This reduces the load on the network, allocates bandwidth for all other mission critical applications, and secures the network from malicious users.
-
High availability
Junos OS Services Redundancy Protocol (JSRP) is a core feature of the SRX series for the branch. JSRP enables a pair of SRX series systems to be easily integrated into high availability network architecture, with redundant physical connections between the systems and the adjacent network switches. With link redundancy, Juniper Networks can address many common causes of system failures, such as a physical port going bad or a cable getting disconnected, to ensure that a connection is available without having to fail over the entire system. This is consistent with a typical active/standby nature of routing resiliency protocols.
-
Session-based forwarding without the performance hit
In order to optimize the throughput and latency of the combined router and firewall, Junos OS implements session-based forwarding, an innovation that combines the session state information of a traditional firewall and the next-hop forwarding of a classic router into a single operation. With Junos OS, a session that is permitted by the forwarding policy is added to the forwarding table along with a pointer to the next-hop route. Established sessions have a single table lookup to verify that the session has been permitted and to find the next hop. This efficient algorithm improves throughput and lowers latency for session traffic when compared with a classic router that performs multiple table lookups to verify session information and then to find a next-hop route.
What's in the box:
- Juniper Networks SRX110 Services Gateway
- External power adapter
