ENET 2 Fiber OM1 MMF 2.0MM 500M Bulk Cabling
The ENET 2 Fiber OM1 MMF bulk cabling delivers reliable multimode fiber connectivity for enterprise network infrastructure. This 500-meter spool of OM1 multimode fiber is engineered for high-performance data center, campus, and backbone network applications requiring cost-effective fiber-optic solutions. Built to factory specifications, this 2.0mm bulk cabling supports legacy and modern network architectures with proven durability and consistent signal transmission over extended distances.
Key Features
- 2 Fiber OM1 Multimode configuration for dual-path redundancy
- 500-meter bulk spool reduces installation costs and waste
- 2.0mm jacket diameter for standard conduit compatibility
- OM1 MMF supports 10 Gigabit Ethernet up to 33 meters
- Factory-new ENET Solutions manufacturing quality assurance
- Ideal for data center, campus backbone, and enterprise networks
- Backward compatible with existing multimode infrastructure
Technical Specifications
| Specification |
Value |
| Manufacturer |
ENET Solutions |
| Part Number |
2F-OM1-500M |
| Fiber Type |
OM1 Multimode Fiber (MMF) |
| Fiber Count |
2 Fiber |
| Cable Length |
500 Meters |
| Jacket Diameter |
2.0mm |
| Core Diameter |
62.5 Microns |
| Cladding Diameter |
125 Microns |
| Numerical Aperture |
0.275 |
| Attenuation @ 850nm |
≤3.5 dB/km |
| Attenuation @ 1300nm |
≤1.5 dB/km |
| Bandwidth @ 850nm |
≥200 MHz·km |
| Maximum Distance (10GbE) |
33 Meters |
| Condition |
Factory New |
Frequently Asked Questions
What is OM1 multimode fiber used for?
OM1 multimode fiber is widely used in enterprise networks, data centers, and campus backbone installations. It supports Gigabit Ethernet over distances up to 550 meters and 10 Gigabit Ethernet up to 33 meters, making it ideal for cost-effective network infrastructure where longer distances than single-mode fiber are needed.
How does bulk cabling reduce network installation costs?
Bulk fiber cabling eliminates pre-terminated connector costs and allows custom termination on-site, reducing waste and labor expenses. A 500-meter spool provides flexibility for multiple runs while maintaining consistent quality and performance across your entire installation.
Is ENET OM1 MMF compatible with existing networks?
Yes, ENET 2 Fiber OM1 MMF is fully backward compatible with legacy multimode fiber infrastructure. The 62.5-micron core and standard 2.0mm jacket ensure seamless integration with existing network equipment and cabling systems.
What are the bandwidth and distance specifications for this cabling?
This OM1 bulk cabling delivers 200 MHz·km bandwidth at 850nm and supports Gigabit Ethernet up to 550 meters or 10 Gigabit Ethernet up to 33 meters, with attenuation of ≤3.5 dB/km at 850nm and ≤1.5 dB/km at 1300nm.
