Quick Answer: What replaced OWM3000ST?
Discontinued: OWM3000ST | Replacement: OWM3001ST
Why OPTOMA TECHNOLOGY Discontinued the OWM3000ST
Based on available research, there is no official manufacturer statement, distributor notice, or product page confirming why OPTOMA TECHNOLOGY discontinued or plans to discontinue the OWM3000ST. The current status provided is EOL in progress, which means OWM3000ST may still be available while buyers prepare for transition, but no public Optoma announcement was found to confirm timing, reason, or inventory plans.
Research also did not identify a published end-of-life date for OWM3000ST. No formal reason for discontinuation is available, and no official Optoma cross-reference was found stating that OWM3001ST directly replaces OWM3000ST. For procurement teams, that means the OWM3001ST should be treated as the current available model, while any OWM3000ST migration decision should be validated against your projector model, installation geometry, and site requirements.
In practical terms, if your organization has OWM3000ST listed in internal documentation, service records, or purchasing systems, it is sensible to review OWM3001ST now. Since OWM3001ST is actively sold and documented, it is the better-supported option for new purchasing activity, even though public source material does not confirm the full OWM3000ST lifecycle timeline.
What's New in the OWM3001ST
Published specifications are available for OWM3001ST
One clear difference between OWM3000ST and OWM3001ST is documentation visibility. Research found no usable published specifications for OWM3000ST, while OWM3001ST is listed with current product details. For IT buyers and AV teams, this matters because a documented product is easier to qualify, quote, and standardize.
Adjustable arm range for short-throw installations
The OWM3001ST includes an adjustable arm with a published range of 595 mm to 1350 mm. That gives installers defined flexibility when aligning a short-throw projector to the screen or whiteboard area. Because no OWM3000ST specifications were found, this cannot be presented as an improvement over OWM3000ST, but it is a confirmed characteristic of OWM3001ST that buyers can use in planning.
Defined load capacity and mount weight
The OWM3001ST is specified at 6.8 kg with a maximum load of 7.5 kg. This is important for engineering review, wall support checks, and projector compatibility assessment. No equivalent published figures were found for OWM3000ST in the research set, so teams replacing OWM3000ST should confirm projector weight and mounting requirements before ordering OWM3001ST.
Adjustment controls for alignment
For fine positioning, OWM3001ST includes ±5° pitch, roll, and yaw adjustments, plus ±30 mm horizontal shift and ±40 mm vertical shift. These values give installers a known adjustment envelope during deployment. Again, because no verified OWM3000ST technical data was found, there is no evidence-based way to compare whether OWM3001ST offers more, less, or similar adjustment capability than OWM3000ST.
Current market availability
OWM3001ST is actively listed for sale as a current product. That makes OWM3001ST the practical option for buyers who need a short-throw projector wall mount now. Even without an official Optoma statement linking OWM3000ST to OWM3001ST, the replacement model number OWM3001ST is the one procurement teams should evaluate first when OWM3000ST appears on legacy BOMs or prior installation records.
At-a-Glance Comparison
| Feature | OWM3000ST | OWM3001ST |
|---|---|---|
| Manufacturer | OPTOMA TECHNOLOGY | OPTOMA TECHNOLOGY |
| Status | EOL in progress based on provided status | Actively listed for sale |
| Official replacement confirmation | No public confirmation found | No public confirmation found as direct replacement for OWM3000ST |
| Discontinuation reason | Not announced | Not applicable |
| EOL date | Not announced | Not applicable |
| Product type | No verified public details found | Wall mount for short-throw projectors |
| Arm adjustment range | Unknown | 595-1350 mm |
| Mount weight | Unknown | 6.8 kg |
| Maximum load | Unknown | 7.5 kg |
| Angular adjustment | Unknown | ±5° pitch, roll, and yaw |
| Positional shift | Unknown | ±30 mm horizontal, ±40 mm vertical |
Upgrade Checklist
- Review any internal records that reference OWM3000ST, including BOMs, room standards, procurement catalogs, and service documentation.
- Confirm whether the installed or planned projector is a short-throw model suitable for the OWM3001ST wall mount design.
- Check the projector weight against the OWM3001ST maximum load of 7.5 kg.
- Measure the required wall-to-projector distance and compare it with the OWM3001ST adjustable arm range of 595 mm to 1350 mm.
- Verify that the available installation space allows for the OWM3001ST alignment adjustments: ±5° pitch, roll, yaw, plus ±30 mm horizontal and ±40 mm vertical shift.
- Because no verified OWM3000ST specifications were found, do not assume bracket dimensions, reach, or adjustment behavior are identical between OWM3000ST and OWM3001ST.
- For standardization projects, update purchasing templates so new requests use OWM3001ST instead of OWM3000ST where appropriate.
- If continuity is critical, ask your reseller to confirm current availability of both OWM3000ST and OWM3001ST before placing a bulk order.
Bottom Line
The OWM3000ST is best treated as a legacy Optoma part with an EOL-in-progress status, but public research does not confirm an official discontinuation notice, reason, or end date. The OWM3001ST is the current, documented model available to buy, making it the practical choice for teams replacing or standardizing away from OWM3000ST.
Since no official Optoma source confirms that OWM3001ST directly replaces OWM3000ST, buyers should validate fit, load, and installation requirements before migration. For most purchasing workflows, moving future orders to OWM3001ST is the clearest path.
Ready to switch? Shop OWM3001ST →
