Quick Answer: What replaced MCP7Y40-N002?
Discontinued: MCP7Y40-N002 | Replacement: NVIDIA CORPORATION
Why MCP7Y40-N01A Discontinued the MCP7Y40-N002
Based on available NVIDIA documentation, MCP7Y40-N002 is not officially listed as discontinued or end of life. Current supported-cable documentation still includes MCP7Y40-N002, and no published NVIDIA EOL notice names MCP7Y40-N002 or MCP7Y40-N01A as discontinued parts.
That makes this case unusual for buyers searching for MCP7Y40-N002 replacement guidance. The market may show MCP7Y40-N01A and MCP7Y40-N002 together because they are closely related variants in the same NVIDIA cable family, but the research does not show an official manufacturer statement that MCP7Y40-N01A discontinued MCP7Y40-N002. It also does not show NVIDIA CORPORATION as a formal replacement part number in the usual sense.
Instead, the evidence points to MCP7Y40-N002 and MCP7Y40-N01A being sibling options within the same product family. NVIDIA documentation presents them as different cable configurations rather than old-versus-new lifecycle replacements. For procurement teams, that means any transition away from MCP7Y40-N002 should be treated as a specification-based substitution review, not as a confirmed mandatory EOL migration.
It is also important to note that no official last-time-buy date, no last-ship date, and no manufacturer-stated discontinuation reason were found for MCP7Y40-N002. Although this page uses the requested discontinued/replacement format, IT buyers should understand that the underlying research indicates MCP7Y40-N002 remains an active, supported NVIDIA part at the time of review.
What's New in the NVIDIA CORPORATION
When buyers compare MCP7Y40-N002 with the referenced replacement path, the practical comparison is really between MCP7Y40-N002 and MCP7Y40-N01A. The main differences are physical cable attributes that can matter for rack layout, airflow, bend handling, and installation planning.
Cable length
MCP7Y40-N002 is a 2.0 m cable, while MCP7Y40-N01A is 1.5 m. If you are evaluating NVIDIA CORPORATION as the replacement search term for MCP7Y40-N002, cable reach is the first item to confirm. A shorter 1.5 m assembly may work well in tightly planned rack environments, but it is not a like-for-like length match for MCP7Y40-N002.
Wire gauge
MCP7Y40-N002 uses 26 AWG, while MCP7Y40-N01A uses 30 AWG. That is a meaningful construction difference. Buyers replacing MCP7Y40-N002 should verify whether the thinner 30 AWG option in MCP7Y40-N01A aligns with their mechanical and routing requirements before ordering NVIDIA CORPORATION search results.
Cable outer diameter
MCP7Y40-N002 has a 7.1 mm cable outer diameter, compared with 5.7 mm for MCP7Y40-N01A. In dense cable paths, that smaller diameter may help with cable management. At the same time, teams standardizing on MCP7Y40-N002 should note that the physical handling characteristics will differ.
Nominal cable weight
MCP7Y40-N002 is listed at 71 kg/km nominal cable weight, while MCP7Y40-N01A is 57 kg/km. This will not usually drive a purchasing decision by itself, but it is another sign that MCP7Y40-N002 and MCP7Y40-N01A are variant choices, not identical parts with only a label change.
Shared platform and use case
Both MCP7Y40-N002 and MCP7Y40-N01A belong to the same NVIDIA passive copper splitter cable family for InfiniBand NDR environments. Both are described as 800 Gb/s OSFP twin port to 4x 200 Gb/s QSFP112 breakout DACs. So while MCP7Y40-N002 and the NVIDIA CORPORATION search path point to the same general application, the detailed physical specifications should still be checked carefully.
At-a-Glance Comparison
| Feature | MCP7Y40-N002 | NVIDIA CORPORATION |
|---|---|---|
| Practical comparison basis | MCP7Y40-N002 original part | Market search path most closely aligned to MCP7Y40-N01A variant |
| Official NVIDIA EOL status | No official EOL notice found | No official replacement notice found |
| EOL date announced | Not announced | Not applicable from available documents |
| Cable length | 2.0 m | 1.5 m |
| Wire gauge | 26 AWG | 30 AWG |
| Cable OD | 7.1 mm | 5.7 mm |
| Nominal cable weight | 71 kg/km | 57 kg/km |
| Product family | Passive copper splitter cable | Same NVIDIA family context |
| Primary use | 800 Gb/s OSFP twin port to 4x 200 Gb/s QSFP112 breakout | Same use case family |
Upgrade Checklist
- Confirm whether you really need to replace MCP7Y40-N002. Current research indicates MCP7Y40-N002 is still supported and not officially EOL.
- Check the required cable reach in the rack. MCP7Y40-N002 is 2.0 m, while the compared variant is 1.5 m.
- Review physical routing constraints, including wire gauge, cable OD, and bundle density, before approving NVIDIA CORPORATION as a substitute buying path.
- Validate that your target deployment uses the same InfiniBand NDR passive copper splitter cable architecture expected for MCP7Y40-N002.
- For standardized environments, document the difference between MCP7Y40-N002 and MCP7Y40-N01A so field teams do not assume they are interchangeable without review.
- Ask your supplier for current availability and supported configuration guidance if you are sourcing MCP7Y40-N002 or evaluating NVIDIA CORPORATION listings.
Bottom Line
MCP7Y40-N002 does not appear in official NVIDIA EOL documentation, and no formal NVIDIA replacement part has been published for it. In practice, buyers comparing MCP7Y40-N002 with NVIDIA CORPORATION results should treat MCP7Y40-N01A as a related variant, not a confirmed manufacturer-declared successor.
If you are sourcing around MCP7Y40-N002, focus on the physical differences such as length, AWG, cable OD, and weight before making a substitution decision. That approach will reduce ordering risk and help ensure the selected NVIDIA CORPORATION option fits your deployment.
Ready to switch? Shop NVIDIA CORPORATION →
