Quick Answer: What replaced IMC-713-AC-US?
Discontinued: IMC-713-AC-US | Replacement: IMC-713-2AC-US
Why B+B SMARTWORX Discontinued the IMC-713-AC-US
Based on available research, there is no direct official confirmation that B+B SMARTWORX has fully discontinued IMC-713-AC-US or formally published an end-of-life notice for it. The current status is best described as EOL in progress: IMC-713-AC-US may still be available through some channels, but buyers should plan for transition risk because discontinuation has been discussed without a published timeline.
Just as important, no official reason for the IMC-713-AC-US status change was found in the research. There is no confirmed statement tying IMC-713-AC-US to a regulatory update, hardware redesign, efficiency change, or product family refresh. For procurement teams, that means the practical issue is not why IMC-713-AC-US may be moving out of the market, but how to reduce sourcing risk if future availability becomes limited.
The research also shows that B+B SmartWorx product lines now appear under Advantech, and a closely related model, IMC-713-ACDC-US, is shown as active. However, that does not confirm that IMC-713-ACDC-US replaces IMC-713-AC-US, and it does not establish a formal EOL date for IMC-713-AC-US. In the same way, IMC-713-2AC-US appears in distribution listings, but no manufacturer-backed source in the research explicitly names IMC-713-2AC-US as the official successor. Tecisoft is positioning IMC-713-2AC-US as the replacement path for buyers needing a current sourcing option.
What's New in the IMC-713-2AC-US
Replacement path for ongoing procurement
The main practical update is availability planning. If your team has been buying IMC-713-AC-US, the part number IMC-713-2AC-US is the replacement to evaluate for new purchases. Even without a published manufacturer transition bulletin, using IMC-713-2AC-US can help standardize future orders around a part that is actively listed in the channel.
No official technical comparison published
There are no verified technical specifications in the research that define the differences between IMC-713-AC-US and IMC-713-2AC-US. That means buyers should avoid assuming power, chassis, slot, management, or compatibility changes unless they are confirmed on a current datasheet or quote documentation. For technical teams, this is a signal to validate requirements before approving IMC-713-2AC-US as a drop-in replacement for IMC-713-AC-US.
Related active model appears in the product family
The only product detail surfaced in the research is for IMC-713-ACDC-US, described as a managed modular 3-slot media converter chassis with AC/DC power. This indicates the IMC-713 family remains relevant, but it does not clarify whether IMC-713-2AC-US introduces new power options, revised chassis design, or another functional change relative to IMC-713-AC-US.
What IT buyers should focus on
When comparing IMC-713-AC-US and IMC-713-2AC-US, focus on operational fit rather than assumptions. Confirm the installed environment, expected modules, power input requirements, and any site-specific approvals. If you need continuity in a managed modular media converter chassis deployment, the right process is to verify IMC-713-2AC-US against your current IMC-713-AC-US configuration before placing volume orders.
At-a-Glance Comparison
| Feature | IMC-713-AC-US | IMC-713-2AC-US |
|---|---|---|
| Manufacturer | B+B SMARTWORX | B+B SMARTWORX |
| Current market status | EOL in progress; still may be available | Listed as replacement path; distributor listing found |
| Official EOL confirmation | No direct confirmation found in research | Not applicable |
| Official replacement confirmation | No manufacturer-backed replacement notice found | No official confirmation found naming it as replacement |
| EOL date | Not announced | Not applicable |
| Reason for discontinuation | Not announced | Not announced |
| Technical differences | No verified comparison data available | No verified comparison data available |
| Known related family detail | Related model IMC-713-ACDC-US shown active in research | No detailed specs surfaced in research |
| Best use case | Support installed base while stock remains | Evaluate for future purchases and migration planning |
Upgrade Checklist
- Audit installed equipment. Identify every site, rack, or enclosure currently using IMC-713-AC-US so you know the scope of exposure before stock becomes harder to source.
- Document the exact application. Record module population, power requirements, management needs, and any environmental constraints tied to each IMC-713-AC-US deployment.
- Validate IMC-713-2AC-US fit. Before ordering, confirm that IMC-713-2AC-US matches your operational requirements and procurement standards for the intended installation.
- Check for approved alternates. If your organization uses AVL or approved manufacturer lists, update those records to include IMC-713-2AC-US where appropriate.
- Plan spare stock strategy. If IMC-713-AC-US is installed in critical infrastructure, decide whether to buy last-time spares or transition directly to IMC-713-2AC-US.
- Request current documentation. Ask for current product documentation or quote support to verify any differences between IMC-713-AC-US and IMC-713-2AC-US before deployment.
- Standardize new purchases. For new projects, avoid extending dependence on IMC-713-AC-US if IMC-713-2AC-US is the part your team intends to support going forward.
Bottom Line
IMC-713-AC-US appears to be moving toward discontinuation, but the research does not show a formal manufacturer EOL notice, an official reason, or a published end date. IMC-713-2AC-US is the replacement path to evaluate for ongoing procurement, but buyers should verify technical fit because no official side-by-side comparison was found.
For teams managing installed IMC-713-AC-US equipment, the safest approach is to support the existing base while validating IMC-713-2AC-US for future orders. That reduces sourcing risk without assuming unverified specifications.
Ready to switch? Shop IMC-713-2AC-US →
