Quick Answer: What replaced IMC-713-2AC-EU?
Discontinued: IMC-713-2AC-EU | Replacement: IMC-713-2AC-US
Why B+B SMARTWORX Discontinued the IMC-713-2AC-EU
B+B SMARTWORX has marked IMC-713-2AC-EU as EOL in progress. That means the manufacturer has announced the product is scheduled for obsolescence, but the exact end-of-life date for IMC-713-2AC-EU has not been published. In available channel data, IMC-713-2AC-EU is still referenced and may still appear at distributors, although stock can be limited or temporarily unavailable.
It is important for procurement teams to note that the reason for discontinuing IMC-713-2AC-EU has not been detailed by the manufacturer beyond the general obsolescence notice. There is no confirmed statement tying the discontinuation to a new hardware generation, compliance change, or feature update. For planning purposes, the safest interpretation is that IMC-713-2AC-EU is moving toward phase-out and buyers should avoid treating it as a long-term sourcing option.
Although many buyers are searching for a direct successor, currently available research does not confirm that IMC-713-2AC-US is an official manufacturer-announced replacement for IMC-713-2AC-EU. However, IMC-713-2AC-US appears in market listings as an available US-region variant within the same IMC-71x modular media converter chassis family. Because of that, IMC-713-2AC-US is often the practical part number buyers review when IMC-713-2AC-EU is no longer preferred for new purchases.
What's New in the IMC-713-2AC-US
Regional variant positioning
The main documented distinction between IMC-713-2AC-EU and IMC-713-2AC-US is regional designation. Available source material indicates both part numbers belong to the same IMC-71x series and are described as a 3-slot modular media converter chassis with 2x AC power. The suffixes strongly suggest regional AC power cord or plug differences: EU for European power configuration and US for United States power configuration.
No confirmed hardware redesign
There is no published evidence showing that IMC-713-2AC-US introduces new features, higher performance, or a revised chassis design compared with IMC-713-2AC-EU. Based on available research, buyers should not assume a technical refresh. Instead, IMC-713-2AC-US should be evaluated as a parallel regional variant that may serve as the practical purchasing path when IMC-713-2AC-EU is in EOL transition.
Current sourcing advantage
For organizations that can use the US-market variant, IMC-713-2AC-US may offer a more straightforward sourcing path than IMC-713-2AC-EU, which is already flagged as scheduled for obsolescence. Even without a formal replacement notice, many buyers prefer to standardize future purchases on the actively available variant rather than continue designing around an EOL in progress SKU.
What buyers should verify
Before moving from IMC-713-2AC-EU to IMC-713-2AC-US, verify site power standards, cord requirements, and regional deployment needs. Since the available sources do not list deeper technical differences, the power-interface region is the most likely practical consideration in a transition from IMC-713-2AC-EU to IMC-713-2AC-US.
At-a-Glance Comparison
| Feature | IMC-713-2AC-EU | IMC-713-2AC-US |
|---|---|---|
| Manufacturer | B+B SMARTWORX | B+B SMARTWORX |
| Lifecycle status | EOL in progress | Available in sources reviewed |
| Replacement status | Being phased out | Used by buyers as an alternative, but not officially confirmed as replacement |
| EOL date | Not announced | Not applicable in available research |
| Reason for change | Scheduled for obsolescence | No replacement notice published |
| Product family | IMC-71x series modular media converter chassis | IMC-71x series modular media converter chassis |
| Form factor detail | 3-slot, 2x AC power | 3-slot, 2x AC power |
| Documented technical changes | None published | None published |
| Likely key difference | EU power/plug variant | US power/plug variant |
Upgrade Checklist
- Confirm whether your installed or planned chassis requirement is specifically IMC-713-2AC-EU or if IMC-713-2AC-US is acceptable for the deployment region.
- Review power input and cord/plug requirements at the installation site, especially if the original BOM called for IMC-713-2AC-EU.
- Validate that your internal documentation, rack standards, and spare parts process can support a US-region variant if adopting IMC-713-2AC-US.
- Check current stock conditions early. Since IMC-713-2AC-EU is EOL in progress, lead times and availability may become less predictable.
- Do not assume new features in IMC-713-2AC-US. Available research supports family similarity, not a confirmed technical upgrade.
- For new purchases, consider reducing dependency on IMC-713-2AC-EU and align future buys around available part numbers that match your region and sourcing policy.
- Keep records of any approved substitution from IMC-713-2AC-EU to IMC-713-2AC-US for procurement, maintenance, and future service planning.
Bottom Line
IMC-713-2AC-EU from B+B SMARTWORX is in EOL in progress status, with no announced end date and no detailed manufacturer explanation beyond scheduled obsolescence. While IMC-713-2AC-US is commonly reviewed as the practical alternative, available sources do not confirm it as an official replacement for IMC-713-2AC-EU.
For most buyers, the key decision point is not a feature change but a region and sourcing question. If your application supports the US variant, IMC-713-2AC-US may be the more sustainable option to evaluate as IMC-713-2AC-EU moves closer to discontinuation.
Ready to switch? Shop IMC-713-2AC-US →
