Quick Answer: What replaced SMART1000LCD?
Discontinued: SMART1000LCD | Replacement: ECO1000LCD
Why EATON Discontinued the SMART1000LCD
EATON SMART1000LCD is fully discontinued and no longer available for purchase. The direct replacement is the EATON ECO1000LCD, which was introduced as the newer, more energy-efficient option in the same 1000VA class. Based on available manufacturer and channel research, the SMART1000LCD was phased out as EATON transitioned buyers to the ECO1000LCD platform with ENERGY STAR certification and improved operating efficiency.
For IT buyers who previously standardized on SMART1000LCD, this change is mainly about power efficiency and updated outlet behavior rather than a major shift in UPS category. Both SMART1000LCD and ECO1000LCD are line-interactive UPS models with LCD visibility and automatic voltage regulation, so the replacement path is straightforward in many small office, desktop, and network edge environments.
One point worth noting is that no official end-of-life date for SMART1000LCD has been announced in the available research. Even so, the product status is fully discontinued, and procurement teams should plan around ECO1000LCD for current sourcing instead of trying to extend a SMART1000LCD bill of materials.
What's New in the ECO1000LCD
Higher usable wattage in the same 1000VA class
The most practical improvement from SMART1000LCD to ECO1000LCD is output capacity at the watt level. The discontinued SMART1000LCD is rated at 1000VA / 500W, while the replacement ECO1000LCD is rated at 1000VA / 600W. For environments where the VA rating stayed acceptable but the real power budget was tight, ECO1000LCD gives buyers more headroom without moving to a larger UPS family.
ENERGY STAR and improved operating efficiency
The main reason EATON discontinued SMART1000LCD was the move to a more energy-efficient platform. ECO1000LCD adds ENERGY STAR certification, more than 95% efficiency, and ECO outlet functionality. By comparison, SMART1000LCD is a standard line-interactive design without the same green-focused positioning. For organizations tracking energy use across branch offices, workstations, and network closets, ECO1000LCD aligns better with current efficiency requirements.
Different outlet behavior for load control
SMART1000LCD provides 8 x NEMA 5-15R outlets. ECO1000LCD changes that layout to 4 battery-backed outlets plus 4 surge-only outlets that support ECO mode. This matters during replacement planning. If your existing SMART1000LCD deployment assumes all eight outlets behave the same way, the ECO1000LCD introduces more deliberate load segmentation. That can be helpful for non-critical peripherals, but it should be reviewed before a like-for-like swap.
Updated protection and battery details
SMART1000LCD includes TEL/DSL and coax protection. ECO1000LCD includes TEL/DSL plus Ethernet suppression, and the research also identifies RBC51 as the replacement battery cartridge used with ECO1000LCD. For IT teams supporting network-connected devices, the Ethernet suppression detail may be relevant when comparing port-level protection requirements between SMART1000LCD and ECO1000LCD.
Runtime information available for ECO1000LCD
The research provided includes a half-load runtime of 7 minutes for ECO1000LCD. A comparable half-load runtime figure for SMART1000LCD was not specified in the research set, so buyers should avoid assuming an exact runtime match. When replacing SMART1000LCD units in production, confirm the real attached load and required shutdown window before standardizing on ECO1000LCD.
At-a-Glance Comparison
| Feature | SMART1000LCD | ECO1000LCD |
|---|---|---|
| Manufacturer | EATON | EATON |
| Status | Fully discontinued | Current replacement |
| Power Rating | 1000VA / 500W | 1000VA / 600W |
| Topology | Line-interactive | Line-interactive |
| Display | LCD | LCD |
| Outlets | 8 x NEMA 5-15R | 4 battery + 4 surge-only (ECO mode) |
| Efficiency / Green Features | Standard line-interactive | ENERGY STAR, >95% efficiency, ECO outlets |
| Communications / Line Protection | TEL/DSL, Coax protection | TEL/DSL + Ethernet suppression |
| Battery Runtime at Half Load | Not specified in provided research | 7 min |
| Battery Cartridge | Not specified in provided research | RBC51 |
| EOL Date | Not announced | Not applicable |
Upgrade Checklist
- Confirm the installed model. Verify that the deployed unit is SMART1000LCD and not a similar part number such as another SMART1000LCD variant.
- Review actual watt load. Compare your connected load against 500W on SMART1000LCD and 600W on ECO1000LCD to validate fit.
- Map outlet usage. Check whether all eight outlets on the old SMART1000LCD are currently used as battery-backed, because ECO1000LCD separates battery and surge-only outlets.
- Check line protection needs. If your current SMART1000LCD deployment relies on coax protection, review that requirement carefully since the provided ECO1000LCD data lists TEL/DSL and Ethernet suppression instead.
- Validate runtime expectations. ECO1000LCD is listed at 7 minutes at half load in the provided research. Confirm that this matches your shutdown policy and device tolerance.
- Plan battery maintenance. For lifecycle support, note that ECO1000LCD uses the RBC51 battery cartridge.
- Update procurement records. Replace SMART1000LCD in internal catalogs, refresh standards lists, and approved vendor templates with ECO1000LCD.
- Source through an authorized reseller. Since SMART1000LCD is no longer available for purchase, direct new orders to ECO1000LCD.
Bottom Line
The EATON SMART1000LCD is fully discontinued, and ECO1000LCD is the correct replacement for buyers needing a current 1000VA line-interactive UPS in this product class. ECO1000LCD keeps the same general deployment role while adding higher wattage, ENERGY STAR efficiency, and ECO outlet functionality, so it is the practical migration path for most SMART1000LCD replacements.
Before switching from SMART1000LCD to ECO1000LCD, review outlet behavior, runtime needs, and any protection requirements tied to your existing installation. Those checks will help ensure a clean replacement with no surprises during rollout.
Ready to switch? Shop ECO1000LCD →
