Quick Answer: What replaced PW103SW2U413?
Discontinued: PW103SW2U413 | Replacement: EMAT10-10
Why EATON Discontinued the PW103SW2U413
The available research indicates that EATON PW103SW2U413 is fully discontinued and no longer for sale, but EATON has not published a clear public explanation for the discontinuation. No official end-of-life bulletin, manufacturer note, or Eaton lifecycle document in the supplied findings gives a reason for retiring PW103SW2U413, and no announced EOL date has been found.
That means IT buyers should treat PW103SW2U413 as an end-of-sale product with limited market visibility. Some distributors may still show PW103SW2U413 as factory new or in stock, but those listings do not confirm current Eaton support or active manufacturing. For procurement planning, the safest interpretation is that PW103SW2U413 should be considered unavailable for new standard purchasing activity.
It is also important to note that the research does not verify EMAT10-10 as an official Eaton replacement for PW103SW2U413. The request identifies EMAT10-10 as the replacement part, but the findings provided show no Eaton document or announcement directly linking PW103SW2U413 to EMAT10-10. For that reason, buyers evaluating EMAT10-10 against PW103SW2U413 should treat the change as a practical sourcing path rather than a manufacturer-confirmed one-to-one successor notice.
Known details for PW103SW2U413 in the research are limited but useful for identification. PW103SW2U413 is described as a 1-phase 100-240V 16A C20 2U/1U switched ePDU with 8 x C13 outlets. Beyond that, the discontinuation reason, official timeline, and formal replacement mapping remain unconfirmed in the available sources.
What's New in the EMAT10-10
Replacement path is market-based, not officially verified
The most important point for buyers is that EMAT10-10 appears in this discussion as the proposed replacement for PW103SW2U413, but the research does not confirm that EATON has designated EMAT10-10 as the official successor. If your organization requires documented manufacturer replacement validation before approving a change, you should request that confirmation before standardizing on EMAT10-10.
Technical comparison data is not available in the supplied research
No reliable specification set for EMAT10-10 was included in the findings, and no side-by-side Eaton comparison between PW103SW2U413 and EMAT10-10 was identified. Because of that, there is no verified basis to claim differences in power input, outlet count, rack size, switching features, monitoring functions, or environmental ratings. Any migration from PW103SW2U413 to EMAT10-10 should therefore begin with a formal spec check.
What is known about PW103SW2U413
For reference, PW103SW2U413 is described in the research as a single-phase 100-240V, 16A, C20, switched ePDU in a 2U/1U form factor with 8 x C13 outlets. This gives procurement and facilities teams a starting point when reviewing EMAT10-10 for fit, power compatibility, and outlet configuration. However, because EMAT10-10 specifications were not provided, those attributes should not be assumed to match.
Why this matters for IT procurement
When a part like PW103SW2U413 is fully discontinued without a published Eaton crossover notice, the risk is not only supply availability. It also affects documentation, internal part master data, sparing strategy, and rack standardization. If EMAT10-10 is being considered to replace PW103SW2U413, the selection process should include electrical validation, mounting review, and operational feature review before purchase.
At-a-Glance Comparison
| Feature | PW103SW2U413 | EMAT10-10 |
|---|---|---|
| Manufacturer | EATON | EATON |
| Status | Fully discontinued; no longer for sale | Proposed replacement in this article |
| Official replacement confirmed by Eaton | No official replacement confirmed in supplied research | No verification found linking EMAT10-10 to PW103SW2U413 |
| Discontinuation reason | Not announced | Not applicable in supplied research |
| EOL date | Not announced | Not applicable in supplied research |
| Known electrical description | 1-phase 100-240V 16A C20 | Not provided in supplied research |
| Known form factor | 2U/1U switched ePDU | Not provided in supplied research |
| Known outlet count | 8 x C13 | Not provided in supplied research |
| Availability guidance | Avoid new project dependency on PW103SW2U413 | Validate fit and specs before ordering EMAT10-10 |
Upgrade Checklist
- Confirm internal need. Identify where PW103SW2U413 is installed and whether the replacement is for expansion, break-fix, or standardization.
- Document the current unit. Record the known PW103SW2U413 attributes from your installed base, including input power, connector type, rack position, and outlet usage.
- Validate EMAT10-10 specifications. Before purchase, confirm that EMAT10-10 meets your electrical, mechanical, and operational requirements since no verified side-by-side data was provided.
- Check mounting and cabling. Verify rack space, orientation, inlet type, and cord reach so EMAT10-10 can be deployed without changes to cabinet layout.
- Review switching and management needs. PW103SW2U413 is described as a switched ePDU. Make sure EMAT10-10 supports the control model your environment requires.
- Update procurement records. Mark PW103SW2U413 as discontinued in your ERP, CMDB, or approved vendor list to prevent accidental reordering.
- Align support expectations. Because PW103SW2U413 is fully discontinued, confirm warranty, serviceability, and long-term sourcing for EMAT10-10 before rollout.
- Buy through a trusted source. If EMAT10-10 is the part you plan to deploy, use a reliable reseller channel and keep purchase records tied to the retired PW103SW2U413 reference.
Bottom Line
PW103SW2U413 is fully discontinued, with no announced EOL date and no published Eaton explanation in the supplied research. EMAT10-10 is being used here as the replacement buying path, but the research does not verify EMAT10-10 as the official Eaton successor to PW103SW2U413.
For IT procurement teams, the practical next step is to stop planning around PW103SW2U413 availability and validate EMAT10-10 carefully before standardizing on it. This is especially important if you need a documented match for the known PW103SW2U413 switched ePDU configuration.
Ready to switch? Shop EMAT10-10 →
