Quick Answer: What replaced NCX-0004-SCMICRO?
Discontinued: NCX-0004-SCMICRO | Replacement: NCX-0003-SCMICRO
Why CRADLEPOINT INC Discontinued the NCX-0004-SCMICRO
CRADLEPOINT INC lists NCX-0004-SCMICRO as fully discontinued. The published lifecycle timeline shows an End-of-Sale announcement on February 8, 2023, with NCX-0004-SCMICRO reaching End-of-Sale on August 9, 2023. After that date, NCX-0004-SCMICRO was no longer available for new orders through Cradlepoint channels. Based on the available research, Cradlepoint did not publish a detailed product-specific technical reason for discontinuing NCX-0004-SCMICRO. Instead, the change appears to follow the standard Cradlepoint product lifecycle process, where products move from active sale to end-of-sale and then to end-of-life support milestones.
For IT buyers and procurement teams, the key point is straightforward: NCX-0004-SCMICRO cannot be purchased new, so any current demand needs to be redirected to an alternative ordering path. In this case, NCX-0003-SCMICRO is the replacement part being used for procurement and continuity. Support for deployed NCX-0004-SCMICRO units may continue until the stated end-of-life support date of August 9, 2028, but support availability is not the same as new product availability.
If your organization still has NCX-0004-SCMICRO on standards lists, quotes, or open BOMs, those records should be updated now. This helps avoid delays in sourcing, approval workflows, and project deployment.
What's New in the NCX-0003-SCMICRO
Replacement path for discontinued NCX-0004-SCMICRO
The most important change is commercial rather than technical: NCX-0003-SCMICRO is the part to buy when NCX-0004-SCMICRO is no longer available. Since NCX-0004-SCMICRO is fully discontinued and cannot be ordered new, NCX-0003-SCMICRO serves as the active replacement path for purchasing teams that need continuity.
Availability status is the main documented difference
Based on the available research, there are no published technical comparison details confirming feature, performance, or hardware differences between NCX-0004-SCMICRO and NCX-0003-SCMICRO. Both appear to be NetCloud Exchange-related SKUs, but the manufacturer materials reviewed do not confirm a direct technical mapping or detailed specification delta. That means buyers should treat the best-documented difference as availability: NCX-0004-SCMICRO is end-of-sale and unavailable for new orders, while NCX-0003-SCMICRO is the orderable replacement part referenced here.
What buyers should verify before ordering NCX-0003-SCMICRO
Because public source material does not provide a technical side-by-side for NCX-0004-SCMICRO versus NCX-0003-SCMICRO, engineering and procurement teams should confirm internal requirements before placing an order. In practical terms, that means checking entitlement, deployment fit, licensing expectations, and any project-specific dependencies tied to the legacy NCX-0004-SCMICRO SKU. This is especially important in controlled enterprise environments where part numbers are tied to approved configurations.
- Confirm that NCX-0003-SCMICRO is the correct purchasing replacement for the discontinued NCX-0004-SCMICRO requirement.
- Review internal configuration standards and SKU approval lists.
- Validate any support or lifecycle planning against the August 9, 2028 support milestone for existing NCX-0004-SCMICRO deployments.
At-a-Glance Comparison
| Feature | NCX-0004-SCMICRO | NCX-0003-SCMICRO |
|---|---|---|
| Manufacturer | CRADLEPOINT INC | CRADLEPOINT INC |
| Part status | Fully discontinued | Replacement part for purchasing |
| New orders available | No | Yes, via Tecisoft listing |
| End-of-Sale announcement | 2023-02-08 | Not provided in research |
| End-of-Sale date | 2023-08-09 | Not provided in research |
| End-of-Life support date | 2028-08-09 | Not provided in research |
| Official manufacturer-confirmed replacement | No specific replacement confirmed in reviewed manufacturer notices | Not confirmed in manufacturer notices reviewed |
| Technical differences | Not published in available research | Not published in available research |
| Procurement guidance | Remove from new quotes and BOMs | Use for replacement purchasing path |
Upgrade Checklist
- Find every reference to NCX-0004-SCMICRO in your ERP, procurement catalog, BOM templates, and project documentation.
- Mark NCX-0004-SCMICRO as end-of-sale so buyers do not submit new requisitions for an unavailable part.
- Replace quote requests that specify NCX-0004-SCMICRO with NCX-0003-SCMICRO to keep sourcing moving.
- Review support planning for installed NCX-0004-SCMICRO environments, noting the stated August 9, 2028 end-of-life support date.
- Confirm deployment requirements with your technical team, since published research does not provide a validated technical comparison between NCX-0004-SCMICRO and NCX-0003-SCMICRO.
- Update approved vendor and reseller records so NCX-0003-SCMICRO becomes the standard orderable SKU going forward.
- Check project timing for any pending refresh or expansion work that could be delayed by continued references to NCX-0004-SCMICRO.
- Buy from an authorized sourcing channel to reduce order friction and maintain documentation quality for audits and internal approvals.
Bottom Line
NCX-0004-SCMICRO is fully discontinued by CRADLEPOINT INC and has been unavailable for new orders since August 9, 2023. While public research does not confirm detailed technical differences between NCX-0004-SCMICRO and NCX-0003-SCMICRO, the practical procurement move is to transition purchasing activity to NCX-0003-SCMICRO and update internal records accordingly.
For organizations still managing deployed NCX-0004-SCMICRO units, support may continue through August 9, 2028, but new buying should shift away from the retired SKU. That makes NCX-0003-SCMICRO the relevant part number to use in current sourcing workflows.
Ready to switch? Shop NCX-0003-SCMICRO →
