Quick Answer: What replaced ADAM-4510-F?
Discontinued: ADAM-4510-F | Replacement: B+B SMARTWORX
Why ADAM-4510-EE Discontinued the ADAM-4510-F
Available research shows an important part-number chain that buyers should understand before ordering. ADAM-4510-EE is fully discontinued, with official EOL status confirmed through manufacturer and distributor research. For installed bases using ADAM-4510-EE, the identified replacement was ADAM-4510-F. That means ADAM-4510-F did not replace itself; it replaced the older ADAM-4510-EE unit.
The situation has now changed again. According to Advantech phase-out notices for the ADAM-4510 series, ADAM-4510-F is in the EOL process. It is not the same as fully discontinued today, but it has formal phase-out dates. The published timeline lists a phase-out date of 27-Nov-2025, a last-time-buy date of 31-May-2026, and a last-shipment date of 31-Aug-2026.
Research also shows that the official reason for the ADAM-4510 series phase-out is CPLD component obsolescence, specifically the phase-out of component part number 14S8904510. For ADAM-4510-EE, the available sources confirm full discontinuation, but they do not state a separate manufacturer reason in the visible documentation reviewed.
One more point matters for procurement teams: B+B SMARTWORX is a brand name, not a specific part number. The documented part-number progression is ADAM-4510-EE to ADAM-4510-F, and then from ADAM-4510-F to ADAM-4510-G. So while many buyers search for B+B SMARTWORX when replacing older hardware, the official replacement path in the research is based on ADAM part numbers.
What's New in the B+B SMARTWORX
ADAM-4510-F replaced ADAM-4510-EE
The clearest change in the source material is the generational shift from ADAM-4510-EE to ADAM-4510-F. If your installed device label references B+B SMARTWORX ADAM-4510-EE, the replacement identified in Tecisoft research is ADAM-4510-F. This is the main cross-reference buyers need when maintaining older systems.
ADAM-4510-F is already in phase-out
Although many searches ask whether B+B SMARTWORX replaced ADAM-4510-F, the research says something more specific: ADAM-4510-F itself is now in EOL process. That means buyers supporting current projects should verify order timing against last-time-buy and last-shipment windows.
Official next replacement is ADAM-4510-G
The manufacturer-listed successor to ADAM-4510-F is ADAM-4510-G. For variant models, the notice also lists ADAM-4510S-G as the suggested replacement for ADAM-4510S-F. Replacement availability is listed as March 2026. This matters because teams searching for B+B SMARTWORX may need to map brand-level searches to the correct current Advantech part number.
B+B SMARTWORX is a search term, not the official SKU
For SEO and purchasing accuracy, it is important to separate brand and SKU. B+B SMARTWORX helps identify the product family historically associated with some rebranded ADAM modules, but it is not the official replacement part number for ADAM-4510-F. If you need an exact successor, the documented official replacement is ADAM-4510-G, not a generic B+B SMARTWORX item.
At-a-Glance Comparison
| Feature | ADAM-4510-F | B+B SMARTWORX |
|---|---|---|
| Type referenced in research | Specific part number | Brand name, not a part number |
| Status | In EOL process | Not a single SKU, so status depends on exact item |
| Relationship to ADAM-4510-EE | Replacement for ADAM-4510-EE | Historical brand associated with older ADAM-4510-EE labeling |
| Official replacement path | Replaced by ADAM-4510-G | No source shows B+B SMARTWORX as the official successor SKU |
| Phase-out date | 27-Nov-2025 | Not applicable at brand level |
| Last time buy | 31-May-2026 | Not applicable at brand level |
| Last shipment | 31-Aug-2026 | Not applicable at brand level |
| Stated discontinuation reason | CPLD phase-out, component 14S8904510 | No single reason because B+B SMARTWORX is not one SKU |
Upgrade Checklist
- Check the exact label on the installed unit. Confirm whether you have ADAM-4510-EE, ADAM-4510-F, or another ADAM-4510 variant.
- If the legacy unit is ADAM-4510-EE, use the documented cross-reference showing ADAM-4510-F as the replacement path for that older model.
- If the current requirement is for ADAM-4510-F, review the EOL timing carefully: phase-out 27-Nov-2025, last-time-buy 31-May-2026, and last-shipment 31-Aug-2026.
- For new designs, evaluate whether the official successor ADAM-4510-G is the better long-term choice instead of placing new dependency on ADAM-4510-F.
- Do not use B+B SMARTWORX alone as the purchasing identifier. Treat it as a brand search term and confirm the exact required part number before issuing a PO.
- Align internal BOMs, spare stock plans, and service documentation so that ADAM-4510-EE, ADAM-4510-F, and ADAM-4510-G are mapped correctly.
- When sourcing through Tecisoft, use the B+B SMARTWORX search page as a starting point, then verify the current, orderable SKU with your procurement or engineering team.
Bottom Line
ADAM-4510-EE is fully discontinued, and ADAM-4510-F was the identified replacement for that older model. However, ADAM-4510-F is now also in the EOL process, and the official next replacement in the research is ADAM-4510-G. Buyers searching for B+B SMARTWORX should remember that it is a brand reference, not the official replacement part number.
Ready to switch? Shop B+B SMARTWORX →
